YUYAO JERA LINE FITTING CO., LTD.
Tension Clamp PA-10-500

Tension Clamp PA-10-500

Send Inquiry

Offered Tension Clamp PA-10-500 are accessible with aluminum alloy or stainless steel messenger. These are made to hook optical fiber cables with steel messenger in the duration hours of construction of transmission fiber optical lines. These self-adjusted hooking clamps are absolutely suitable for utilization with steel messenger. When the anchoring of fiber optical cable takes place, these product are responsible for preventing the slippage or cable insulation damages. Offering comely operation in the indicated load achieved, the stainless steel bails included in these enable the easier installations of these. Offered Tension Clamp PA-10-500 enable an effortless, direct dead-ending of aerial figure-8 cables with the use of steel messenger and the non-use of extra tools.

Key Points :

  • To ensure the operational fluency, tensile test, temperature cycling test, corrosion resistance test and aging test have been executed.
  • Operation is done with temperatures compassing from – 60 °C up to +60 °C test, etc.
  • Materials used are high strength aluminum alloy, stainless steel bail, Zinc wedges.
  • Provided with secured parts, which can avoid the failure of the pieces.
  • Analogs : AC10 500, AC7 500,
 

Type

Bail length, mm

Messenger diameter over insulation, mm

MBL, kN

Weight, kg

FOC line

PA-10-500

500

5 - 10

8

0.340